|
Weldments
Forged Steel Fittings for
building your processor
Yes, they have Pipe Threads to screw pipes
into
These hard to find quality Stamped Steel
and Forged fittings
are designed for welding.
Fittings only available in 1/2", 3/4" & 1" regular US National Pipe Thread
(NPT).
Prices are as listed in the item descriptions
ABSOLUTELY No international orders.
Available as a Kit or individually...
Photos and descriptions see below.
|
Our Most Popular
Stamped Fitting Kit |
Standard Forged kit |
Deluxe Heavy Forged Kit |
| This kit supplies you with enough Stamped 1/8" thick
steel NPT fittings to build one Coned Processor.
2 ea 3/4" Stamped
2 ea 1/2" Stamped
3 ea 3/4" Forged couplings
$36
kit No international orders
|
This kit supplies you with enough Standard flat backed
NPT Forged steel fittings to build one Coned Processor.
2 ea 3/4" Forged flat backed
2 ea 1/2" Forged flat backed
3 ea 3/4" Forged couplings
$58
kit No international orders
|
This kit supplies you with enough Heavy Forged
steel NPT fittings to build one Coned Processor. 2
ea 3/4" Forged heavy
2 ea 1/2" Forged heavy
3 ea 3/4" Forged couplings
$74
kit No international orders
|
Note: Kits do not include the 1" water
heater element screw in fitting because that requires a thermostat spring clip
and is readily available as a kit available from water heater parts suppliers. We can
tell you more about it if you ask us.
Large orders may experience a possible
delivery delay up to a 2 or 3 weeks if we do not have enough stock on hand to
fill your order.
Orders will only be shipped to a verified US PayPal postal address.
To place a mix and match Ala Cart order, email us
and, be sure to tell us what you want!
We will provide you with a custom payment link for your
customized order.
Ala Cart piece orders....
Minimum Qty 10 parts, mixing and
matching is ok
To view or price product....
Scroll right with the arrows and click on any item you want info on.
Hard to find 3/4" Steel pipe Coupling
Stamped 1/8" Steel weldable flange, welds very nicely.
The thread section protrudes into the tank.
Comes in 1/2", 3/4"" National Pipe Taper thread
$10 ea
P/N as folows
Stamp1/2"
Stamp3/4" Flat backed Forged std duty steel flange welds great.
Comes in 1/2", 3/4" NPT
$12 ea
P/N as follows
Flatflange1/2"
Flatflange3/4"
Protruding Back Heavy Forged steel flange welds easily.
Comes in 1/2", 3/4" NPT
$15 ea
P/N as follows
Protrude 1/2"
Protrude 3/4" Heavy Forged steel 3/4" NPT Pipe Coupling perfect for Welding into your processor as a feed through fitting or cutting in half to make a screw in pipe port!
$10 each.
Stamped 1/8" Steel weldable flange, welds very nicely.
The thread section protrudes into the tank.
Comes in 1/2", 3/4"" National Pipe Taper thread
$10 ea
P/N as folows
Stamp1/2"
Stamp3/4"
These are the same forged steel fittings we use to
construct our cone bottomed processor tanks. For more information.
| 
Learn
to Make BioDiesel
